Ghost Door

Aluminum Ghost Sliding Doors

A Ghost Door is an interior sliding door that moves sideways, with running hardware designed to stay discreet. It suits homeowners, architects, and contractors planning an opening with limited swing space and enough room beside it for the panel to slide. OTEC, an aluminum windows and doors supplier in Pampanga, Philippines, documented a glass Ghost Door installation in a Quezon City home and can review the opening and floor conditions for your project.

Request a quote

How a Ghost Sliding Door Works

As the door opens, the panel travels to one side on its running hardware. Confirm which track or guides are concealed, where the panel stops, and what stays visible at the floor and wall. The panel needs enough space beside the opening to move through its full travel.

  • Measure the free wall run and note switches, skirting, cabinets, and nearby door handles.
  • Check the clear passage with the panel open and allow room to reach the handle.
  • Share the finished floor and wall details so OTEC can review the support and guide arrangement.
Aluminum ghost door shown with the door leaf closed
Aluminum ghost door with the door leaf turned open
Aluminum ghost door showing the roller or floor guide detail
Sideways travel and floor clearance The glazed panel slides toward the open side. The floor line is a planning reference. Confirm the roller, guide, and support arrangement for the quoted door.

Plan Your Ghost Door Opening

Send opening width and height, project location, and photos or drawings of the room. Include the wall space beside the opening, skirting, and the existing or proposed floor finish.

Wall Run and Clear Passage

Ask for a drawing that shows the panel in its open and closed positions. Check the clear opening, wall clearance, and access to the handle and running hardware.

Floor Support and Alignment

In OTEC’s Quezon City project, the team added a metal flat bar at the base to stabilize the rollers over uneven wood flooring. Ask what leveling, support, guides, or other preparation your floor needs.

Ghost Door Features and Benefits

Sideways Opening

The panel slides instead of swinging into the room. Check that the wall run stays free so the panel can clear the passage.

Discreet Hardware

A ghost sliding design keeps much of the running hardware out of sight. Confirm which guides or supports are visible and how the rollers can be accessed for service.

Daylight and Privacy

A glazed panel can bring daylight through an interior partition. Ask which safety glass or privacy options fit the panel and hardware.

Finishes and Glass Options

Review the frame sample and glass specification with OTEC. Confirm which finishes and glass types fit the proposed configuration.

Frame Finishes

  • Black
  • White
  • Gray
  • Custom Color

Colors shown are approximate. OTEC’s Quezon City project shows a black frame. Confirm other finishes, review a physical sample, and ask about care for humid or coastal sites.

Glass Selection

Use the chart to discuss privacy, daylight, and heat control. Confirm compatible glass type, thickness, safety glazing, and total panel weight with OTEC.

Technical Specifications

Use this table to review the proposed configuration, site preparation, and quoted scope with OTEC.

SpecificationDetails and what to confirm
MaterialConfirm the aluminum frame profile, panel construction, and compatible glazing or infill.
OpeningSideways sliding panel. Confirm travel direction, stops, handle access, and panel position when fully open.
Profile or seriesConfirm the available series, profile thickness, panel depth, and hardware concealment for the opening.
GlassConfirm glass type, thickness, safety-glazing requirements, and weight.
Finishes and colorsBlack frame shown in the Quezon City installation. Confirm available finishes for the quoted door.
SizesConfirm opening and panel limits, panel weight, wall run, and clear passage.
HardwareConfirm rollers, tracks, guides, stops, handle, locking options, and access for servicing.
Floor support and guidesConfirm finished floor levels, bottom support, guide location, and any required floor preparation.
Wind and water resistanceThe documented project was indoors. For exterior openings, confirm suitability and request applicable wind and water test data.

Where Ghost Doors Work Well

  • Homes. Consider an interior divider or doorway with limited swing space and enough clear wall beside the opening.
  • Condos. Check building approval, finished floor and wall conditions, and any requirements for door openings or alterations.
  • Commercial spaces. Consider interior partitions where the panel has a clear path to slide. Confirm expected daily traffic and maintenance access.

Why Choose OTEC?

OTEC delivered and installed a sliding glass Ghost Door in a Quezon City home. See how OTEC handled the floor and roller support. For your project, ask about availability, site measurement, delivery, and installation in Pampanga or elsewhere in the Philippines.

Ask for the written warranty terms for the door, finish, glass, rollers, guides, and installation. Check coverage, exclusions, care requirements, and claims.

Frequently Asked Questions

How much does an aluminum Ghost Door cost?

Pricing depends on the opening size, panel, glass, hardware, finish, and site preparation. Send OTEC your dimensions, location, and floor photos to request an itemized quote.

How is a Ghost Door different from a regular sliding door?

Both move sideways. A ghost sliding door is designed to keep the running hardware less visible. Ask OTEC which track, guides, or floor supports are visible on the proposed system.

Does a Ghost Door need a floor track?

Bottom support and guides vary by configuration. On OTEC’s Quezon City installation, a metal flat bar supported the rollers over uneven wood flooring. Ask for a section drawing for your opening.

Can a Ghost Door be installed outside or in a typhoon-exposed area?

OTEC’s documented example is indoors. For an exposed exterior opening, ask whether the proposed assembly is suitable and request applicable wind and water test data before choosing the system.

How durable are aluminum Ghost Doors?

Service life depends on the rollers, alignment, floor support, finish, exposure, and frequency of use. Tell OTEC if the door will see heavy traffic, humidity, or coastal salt air.

How do I clean and maintain a Ghost Door?

Clean the aluminum and glass with a soft cloth, fresh water, and mild soap. Keep accessible guide and roller areas clear and follow the hardware care instructions for the proposed system.

Can OTEC measure and install a Ghost Door?

OTEC documented delivery and installation of a sliding Ghost Door in Quezon City. Send your opening size, floor details, and location so OTEC can review availability and confirm the measurement and installation scope.

What warranty comes with a Ghost Door?

Ask for the written warranty terms for the frame, glass, rollers and guides, finish, and installation. Confirm the coverage period, exclusions, and claims process.

Explore Related Aluminum Doors

Request a Ghost Door Quote

Send your project location, doorway dimensions, and photos of the wall and finished floor. Include the available wall run, desired glass or privacy, and whether you need delivery and installation.

Call the Angeles City office at 0936 926 7600 to discuss your project or ask about seeing samples.

Aluminum ghost door installed in a finished opening
WhatsApp OTEC